I’ve been referring to my summer sewing extravaganza as Linenpalooza 2019, but it could also be called Fen Fest for all the Fen mods I’ve sewn. This (last?) one is the most straightforward, and a great transitional piece for Faux Fall dressing given the dried-leaf color (the same as my toffee Robbie pants).

For this one, I cut a size 12 with the same hemline mods as my blue striped one a couple years back, but I also moved the neckline in 1″ at the sides for a less-wide neck opening. I gave it a center-front seam (looks great, saves fabric, win/win), did the prescribed Fen neckband, and added a chest pocket to give it a little more of a t-shirt vibe. It gives me a hint of that Fall feeling for now and will be great for layering if it ever starts to cool off.

.

PREVIOUSLY in Finished Objects: That time I crocheted a hat

The weekend before last, I sewed myself what I thought was the best summer frock I’d ever owned: a blurple caftan made with Merchant & Mills Indian Ink linen and some simple mods to the Fen top (details below). In addition to the color being completely amazing — rich and shifty — the fabric has an incredible heft to it and is a joy to wear. So when it came time to cut my next piece of linen this past Saturday — M&M’s Bonita stripe this time, which I’d bought from Fancy Tiger with pants in mind — I couldn’t stop picturing it as another caftan just like ol’ blurple. Only I had no idea how much more magnificent it would be. I’m thrilled with them both, but the striped one is pure magic.

The challenge of this fabric is that it’s an asymmetrical repeat — two multi-stripes, then one wide blank stripe, repeat — and I had debates with myself and among friends about how best to position it on the dress. After they pleaded for symmetry, I decided to place the wide blank stripe dead center, so my inverted pleats (front and back) would simply pull the two black stripes closer and then it’d fan out below the pleat, with the multi-stripes on either side. What I could not possibly have planned for even if I had tried was that this left the hip pockets I had mapped out on the blurple version perfectly centered over the multi-stripes, with the next set of multi-stripes (at the edges of the front and back) meeting perfectly in the center so they create a double-wide multi-stripe at the side seam. Cutting it out — flat, on the living room floor, so I could make sure I had every single stripe straight and identically positioned — was a job. But from the minute I began sewing, it started revealing all the other magic it had cooked up without me, and I was completely under its spell.

It might be the single best experience of my sewing life, and I’m madly in love with it. Hence the million photos.

Here’s how I made them, and how you can too:

Start with Fancy Tiger’s Fen top and dress pattern — you just need the two pieces for the top: front and back. Pick a size that’s a lot or a little big on you. I’m wearing this with a ton of positive ease, but I think it would look even better on a fuller figure with a bit less ease. All of this also applies to my black tunic version that preceded the dresses, by the way.

1) For the front pattern piece, trace the round neck (I might have raised it a bit when I first traced off this pattern a few years ago) and shoulder, around the sleeve, and down the side to the widest part of the curve. Then draw a line straight down from there to your desired length plus hem allowance. Mine is cut at 52″ from the highest point of the shoulder, at the neck edge. I’m about 5’8″ for reference. Do the same for the back pattern piece.
(I traced the size 18 shoulder line out to the size 20 sleeve edge, and the rest is size 20 down to the hip flare. That makes it 14″ wide from the hip down.)

2) Cut both pieces on the fold as marked and keep them folded, with right sides together. On the front piece, draw a line 1″ in from the fold (parallel with the fold, in other words) from the neck edge down 11″ and same thing on the back from the neck edge down 5″. Stitch along that line, then press the fold open on the wrong side to create the inverted pleat. Top-stitch in place.

3) Cut pockets as desired. My hip pockets are 8″x10″ (the size of a piece of chipboard I had handy!) pressed to 7″x7.5″ — half inch on the sides and bottom, and an inch twice at the top. And my chest pocket is 5.5″x7″ pressed to 4.5″x5″ — half inch all the way around plus another inch on top. Hip pockets are placed 2.5″ from the Center Front and 15.5″ from the neck edge. Chest pocket is placed 1.75″ from CF and 5″ from the neck edge. Top-stitch in place.

4) Sew the shoulder seams together as indicated/desired. Sew the underarm/side seams together as indicated/desired, leaving a split hem if desired. Both of these have split hems on both sides, measured 17″ (blurple) and 15.5″ (stripe) from the bottom edge. Finish seam allowances however you prefer. I French seamed the blurple one down to the split, clipped the seam allowance at that spot, then pressed the split hem open and under before stitching down. Same for the striped one except it’s serged instead of frenched.

5) Finish the sleeves, hem and neck edges as indicated/desired. I did a visible bias facing on blurple and the Fen neckband on the stripe.

For this length, using 60″ wide linen and the size 20 pattern pieces, I was able to get all of the dress and pocket pieces out of three yards, or that plus a pair of pants out of 4 yards. Yes, I now have pants cut from both of these fabrics! And can probably still squeeze a little tank out of the blurple scraps. Which means Linenpalooza ain’t over yet!

.

PREVIOUSLY in sewing: How to sew a kangaroo pocket