Hi, all — happy Anna Vest Knitalong kickoff day! As promised, today’s post is a tutorial on how to knit inset pockets, but just a few things before we get to that:
Please review the introduction before getting started on the knitalong, as there is some pattern errata and other important details. And please also read through the Techniques section at the beginning of the pattern, which contains all sorts of useful tips. Several people have mentioned this will be their first time knitting a garment, and I think it’s a great place to start. It is not a lot of knitting, not very complicated, but will teach you some very valuable skills, especially with regard to finishing. And you get to knit inset pockets! I also think it’s helpful that this vest is knitted in Andalusian Stitch, which is a really simple knits-and-purls stitch pattern, very easily memorized, that also makes it super easy to see where you are in the pattern and ensure you’re doing things on the right row, and so on. And if you post in the comments here and/or use the hashtag #annavestkal on Instagram, you’ll have me and the rest of the group to help you if you run into any trouble!
Ok, now about this tutorial. We’re working here with the Anna Vest pattern. Pictured above are the two front pieces. On the left of the photo is the right front of the vest, which already has its pocket. And on the right of the photo is the left front of the vest, which is ready for the pocket to be created, along with the pocket lining hanging out on a DPN. So those are the two pieces we’re working with below. Note that the pattern calls for the pocket to be knitted in stockinette stitch, which gives a very subtle contrast between the body and the pocket lining. For my black Anna (yarn is Fibre Co. Terra from my stash) and for this tutorial, I’ve opted to knit the pocket lining in Andalusian Stitch, same as the body. Hopefully that will make it even easier for you to see when we’re working with the front or back of the fabric as we go through these simple steps. You can knit your pocket in either stitch, your preference, or even knit the lining in a contrasting color if you like! So here we go—
STEP ONE: CREATE THE POCKET EDGING
This pocket has a ribbed top edge, so basically we just knit the front piece of the sweater until we get to where we want to create that ribbing. In the Anna pattern, on row 23 (a RS row) I have you place markers as you work across the row, delineating the 21 pocket stitches (pictured above, top left). For the next few rows, you maintain the body stitch pattern as established, while knitting 1×1 ribbing between the markers (above, top right). Then it’s time to bind off the top edge of the pocket, i.e., the stitches between the markers (above), which is done on a RS row. Drop the markers as you encounter them, and when you’re done, double check that you’ve bound off the correct number of pocket stitches by confirming that you still have the right stitch counts on either side. (I’m knitting the second size, so I have 12 sts on one side and 14 on the other.) Note that they’re all resting on the needle, with the bound-off gap in the middle.
The next row, the join row, is a WS row, so go ahead and turn your work — and that means both the body and the pocket lining. For the next step you should be looking at the back side of both pieces.
STEP TWO: ATTACH THE POCKET LINING
Here’s where it’s handy if you’ve knitted the pocket lining on a DPN and just left it there, ready to be worked with. At this point, all you do is purl across the first set of stitches on the working needle, then across the pocket lining stitches, then across the second set of stitches on the working needle. (Take care to pull those stitches tight when you’re jumping from the main needle to the DPN, and back.) And voilà, your pocket lining it attached! From this point forward, you just carry on with the body in the established stitch pattern. Here’s how it looks from the front after knitting the next couple of rows:
Note that the pocket lining doesn’t become a pocket until you sew it down. Until then it’s just a flap, flapping around on the back of your knitting. To keep it secure and prevent any strain at the join, I like to take a few removable stitch markers and just pin it to the body (pictured above).
You can go ahead and attach it if you like or, to take the more cautious approach, wait until the pieces have been blocked, and then do the seaming. To attach it, you simply whipstitch one stitch at the edge of the pocket to the adjacent purl bump on the body, and do that on every other row. Then work across the bottom of the pocket in similar fashion. As noted in the Anna pattern, the Andalusian Stitch pattern makes it easy to identify a straight column of stitches to work with, but you might still find it helpful to slide a small-gauge DPN down through the purl bumps on every other row of the body, making it easy to see which stitches you’re whipstitching into. (Or Cocoknits has a good tutorial on this using waste yarn instead of a DPN.)
Ok, let’s get knitting! If you’re doing the knitalong, be sure to use hashtag #annavestkal wherever you post, so everyone can see!
(Stitch markers and pouch from Fringe Supply Co., of course.)
Great tutorial, as always–thank you! What brand of double points do you use? Is the join pretty smooth?
Very clear instructions! Thank you, Karen. Looks like your vest is coming along great.
There’s a knitting mystery finally solved for me! Thank you so much.
Hi Karen, Thanks for putting this together! I’m joining in but knitting the V&As vintage men’s waistcoat pattern because I’m in Europe and unfortunately it would have cost a fortune to ship the book abroad :( Would I knit the vintage waistcoat pattern pockets the same way? I’m working on the back piece now and about to start my first front piece.
As I recall, the pockets in that pattern are done a little differently, most notable difference being a seamed on edge. It’s entirely up to you whether you want to convert it to this approach!
Thanks! I’ll check back in if I have any questions once I get to the pockets.
Pingback: Anna Vest KAL: How to knit inset pockets | Crafted
Thank you for sharing! Such a beautiful yarn and texture!
Hi Karen, I’m really enjoying knitting the Anna Vest in the Thirteen Mile Worsted. I have a question about the errata that you previously posted. I understand that there is a deletion for the right armhole shaping on page 73, but not the left armhole shaping. Is there a reason for this? I have almost completed the right front and I don’t have the same stitch count at the end of the decreases as the pattern specifies for my size (32). (I have 16 and and the pattern says it should be 11.) I just wanted to double check this with you before I proceed with the left side front. Thanks so much for any assistance and/or explanation you can provide.
Carol, I’m sorry, I don’t have the book with me at work so can’t answer more specifically at the moment. But as far as I know, the only error is the one noted in my post. It was a cut-and-paste error when the book was being laid out, such that that fragment of the BO instruction got accidentally introduced into that one spot.
You said you’re making size 32, but the smallest is 34 — is that the one you’re following? My best guess, if your count is off, is that you’ve missed a few decreases along the way.
Thank you for getting back to me Karen. Yes, I am making size 34-my mistake. I’m confused about the correction. In my pattern (both the book and the download) the bind off instructions appear for both the right and left side front (altho worked WS on the right and RS on the left) and if this instruction is deleted then it throws off the total stitches bound off in the next section (15). If this doesn’t make sense to you, I can send you a highlighted photograph of the pattern sections I am questioning. Thanks for your patience.
If you compare the right front and left front instructions, I think you’ll see the difference. The “BO 6 sts” chunk of text does appear correctly under “Begin armhole shaping” for both fronts. However, on the right front (p 73) it *also* incorrectly appears higher up in the page. It’s the first instance of it (i.e., the second instruction under NECK & ARMHOLE SHAPING) where you need to cross it out. Does that help?
Karen, The errata text that you have referenced isn’t in my book copy or downloaded copy of the pattern, hence my confusion. It appears that I have a correct version of the pattern. I’m going to rip the right front back and re-knit the neck and armhole shaping since I didn’t bind off 6 to begin the armhole shaping. (And this will solve my stitch count problem.) Thank you for your responses.
Thanks for the help!
I figured it out! The error is in the book-but not in the pdf download! (I thought I was losing my mind!:) You may want to clarify this for other knitters.
And I see that you do say in your post about the KAL, that the error is in the print book. Once again, the lesson is to read very carefully!
I’m just glad we got to the bottom of your stitch count discrepancy!
Pingback: Queue Check — February 2016 | Fringe Association
Pingback: Queue Check — April 2016 | Fringe Association
Pingback: How to knit inset pockets (top-down) | Fringe Association
Pingback: Top posts of 2016 | Fringe Association
Pingback: 2017 FO-2 : Camel Channel cardigan | Fringe Association
Pingback: The Details: Grafted patch pockets | Fringe Association
Pingback: Anna Vest pattern, now available! | Fringe Association