How to weave on a hand loom

How to weave on a hand loom

You guys know I’ve been super curious about weaving the past couple of years (I never got a chance to tell you about my blissfully calm afternoon of Saori weaving in the midst of our moving mayhem) so I’m thrilled to have these little handmade, solid maple hand looms for the holiday collection at Fringe Supply Co. I own several frame looms and pin looms, and this design is a dream — it’s less fiddly to weave on since the sides are unobstructed. Plus it’s gorgeous. Not surprisingly, this has been one of the most popular items so far this season. When Kathy Cadigan and I were shooting the photos for the holiday catalog, she took a whole series of me using these tools. I love these images, and while the loom does come with a set of instructions, I thought a photo-rich tutorial here might be useful. Pictured in the bottom left photo above, the loom kit includes the I-shaped loom itself, the tiny shuttle, needle stick and bamboo skewer seen to the right of the loom, and the beater at the top of the photo. It also comes with a small amount of warp yarn, as pictured (although the color may vary).

Making small weavings on a loom like this is a great way to use up your scrap yarn stash. If you’re already a weaver, this is an excellent travel loom. And if you’re just curious about weaving, it’s a wonderful way to try your hand at it on a small scale. Fun for the whole family.

Step 1: Warp the loom

I don’t have photos of how to warp the hand loom, since I had done that ahead of the shoot, but it’s pretty intuitive. You simply tie or tape the end of your warp yarn (a nice sturdy, non-elastic cotton is best) at the groove in one corner — any corner will do — and then bring the yarn to the corresponding groove at the other end of the loom. Pulling it nice and taut, catch it around the back of the groove, wrapping the yarn into the adjacent groove. Then again, bring the yarn to the corresponding groove on the opposite side, catch it around the back and into the next groove, and so on. You don’t have to use the full width of the loom. If you want to do a smaller weaving, you can warp only as many grooves as you like, centering them on the loom. To tie off the warp, you can see in the top photo above that I just wound it around the top of the first and second notches at the beginning and the end to keep it secure while I weave. That will allow it to pop off later when I’m ready to remove the weaving from the loom. Same thing if I had just taped it on the back. Whatever works for you! Weaving is easygoing.

How to weave on a hand loom

Step 2: Create a “shed”

As you likely know from grade school experiments with paper plates and construction paper, weaving is under-over-under-over-under, and then on the next pass it’s over-under-over-under-over. (Whether that’s over 1 under 1 or over 2 under 2 is up to you. Experiment with it!) You can do this with a tapestry needle if you like, or by threading your weft yarn through the hole in the end of the needle stick, but it can be helpful to use the weaving tools to create a “shed” — a space between the warp threads — to pass the yarn through. The bamboo skewer is for creating a “fast shed.” Take the skewer and pick up every other warp strand — under-over-under all the way across — then push it up onto the top of the upper cross-piece of the loom, as seen in the photos, and leave it there. This creates a small gap, or shed, that’s easy to pass the needle stick through. Insert the needle stick into this tiny shed space, following the path the skewer took, and turn it on its side to widen the shed, as seen above. For the next pass, you’ll use the needle stick to pick up the opposite warps — over-under-over — then back to the fast shed created by the skewer.

How to weave on a hand loom

Step 3: Load the shuttle and begin weaving

Take a bit of your weft yarn and wind it onto the tiny shuttle as shown. You don’t want a big wad of yarn that will get stuck in the shed — just enough to make however many passes you want to make with that color. Then pass the shuttle through the shed. When changing colors, as seen here, or starting a new length of yarn, just leave the ends dangling — you can simply weave them into the back of the finished piece with a tapestry needle or your fingers. And you also don’t want to pull the weft yarn tight as you pass it back and forth each direction. Keep it loose, with a few inches between it and your previous rows, as seen above. Pulling it tight on each pass will cause the sides of your weaving to draw in. For the white roving seen in the images, I didn’t actually wind the shuttle. I just laid the end of the roving over the notch in one end of the shuttle and used that to push it through the shed.

Now pull out the needle stick, use it to pick up the opposite shed, and pass the shuttle back through the other direction. Continue in that manner, building your weaving upwards as you go. The closer you get to the top of the loom, the tighter it will get. You may find you’re not able to weave right up to the very top.

How to weave on a hand loom

Step 4: Beat the weft into place

As you work, take the beater and use it to press the new rows of weft down against the bottom of the loom and each other. Whether you compress your weaving a great deal or keep it looser it entirely up to you. If you’re weaving with strips of fabric for a little rag rug trivet, say, you might want to pack them very tightly. If you’re making a wall hanging, you might choose to leave some sections loose for a different effect — it just depends what you’re going for.

Tie in long sections of fringe, test out different weaving techniques, have fun with it.

Step 5: Remove the weaving from the loom

Once you’ve woven as large an area as you want, gently remove it from the loom by either cutting the warp or popping it off the ends of the loom. Again, depending what you’re going for, you can leave a gap and tie knots along the top for inserting a piece of driftwood or a dowel for a wall hanging. Or tie the warp into knots along both ends right up against the weft, either leaving the loose ends as fringe or weaving them into the back. Or use a sewing machine and stitch along both ends, then trim or weave in the warp ends.

Et voilà. The first weaving on your beautiful little hand loom.


In case you’re wondering, yes, the fingernails on my left hand are actually blue in these pictures. I’d had a little glove mishap doing some indigo dyeing the previous weekend. What was I dyeing? More on that later.

26 thoughts on “How to weave on a hand loom

  1. These little looms are wonderful to use with children too! We do a summer camp at our farm for children and they love weaving on tiny lap looms. We have even warped with cotton and then used roving as the weft.

  2. once again… Inspiring post! weaving, for me has always been. interesting but, not something I was super compelled to take on. Always though, drawn to anything woven – absolutely ADORE a finished piece of weaving. After seeing your post…. I’m thinkin’, “hmmmm maybe I need to experiment with this!” would love to see something that has been made on that little loom – has anyone sent pics of finished pieces?

    • Not specifically on this loom, no. But a loom is like a pair of knitting needles — you can use it to make whatever you want. If you’re interested in wall hangings, some great people to google for inspiration are Maryanne Moodie and Meghan Shimek. Both work at larger scale, but you can do the same sorts of things smaller on this loom. And I also really like Jaime Rugh’s little mats and such that she weaves on her small frame loom:

  3. I’ve been so curious about weaving. This looks fun! Can you make something longer on this sized loom, say, a scarf? Or are you limited within the size of the loom itself?

  4. OMG – had a minute to check out Maryanne Moodie!!!!!!!!!!! thanks for that, Karen – WOW, those are incredible! I’m seeing weaving in my new year which may start in December!

  5. Looking forward to indulging a little time with this tutorial and Maisy once she gets this gift for Christmas! Thank you!
    And can I just say I’m speechless over these photos? Captivating light and…well, wow. A feast for the eyes!

  6. Are you familiar with peg looms, Karen? They look super easy (saw one at a fiber festival) and while maybe not as fine a weave, a useful item that doesn’t take up a lot of space either. (You should carry some peg looms ;-) Mind you I the last loom I used was when I was in grade school, to make one of those potholders we all made. So tempted on this one!

  7. I just ordered one of these. I have been wanting to start weaving for a while just couldn’t decide what to start with. This seems perfect. Thanks for this great tutorial and adding this kit to your shop.

  8. Pingback: Did someone say indigo? | Fringe Association

  9. Pingback: sunday news #4 | ready to knit

  10. My new loom is wrapped and under the tree, waiting for me to open on Christmas morn! Karen, can you recommend a good book to accompany me on my path to creating great little weavings – looking for some basics along with some inspiration (of course). would appreciate any ideas anyone has to offer. Thanks!

  11. Pingback: 2015 goal: learn to weave | Hello Neverland

  12. Lovely! I have started spinning my own wool and some of it is not really suited to knitting with, so I was contemplating weaving. Thanks for the how-to!

  13. Pingback: Weaving | Digital @ He[ART]

  14. Wonderful tutorial!! I just started doing frame weaving… I was wondering how you weave in the roving? I love the look. Thanks again for sharing.

  15. Pingback: Weaving | Danuta Sierhuis

  16. Pingback: How to Weave on a Hokett Hand Loom | Hokett Would Work

  17. Pingback: past projects: first weaving | d-stashed

  18. Pingback: Top posts of 2015 | Fringe Association

  19. Sorry I am very new to this, so have a beginner question and do not yet know the words… in the pics you show the part that keeps the warp?? (Vertical strings) – every other one Up… this indeed makes that pass wasy. How do you make the return pass— every other Down (opposite as first pass)?

Comments are closed.